X3 ProLaser 2000W
X3 ProLaser 2000W is Electrex’s compact 3-in-1 handheld fibre laser system, designed to deliver maximum flexibility for modern fabrication and maintenance environments. Combining laser welding, cutting and cleaning in a single portable unit, it provides industrial-grade performance with reduced setup time and operating costs. Equipped with a 2000 W fibre laser source and a single […]
- X3 ProLaser 2000W is Electrex’s compact 3-in-1 handheld fibre laser system, designed to deliver maximum flexibility for modern fabrication and maintenance environments.
- Combining laser welding, cutting and cleaning in a single portable unit, it provides industrial-grade performance with reduced setup time and operating costs.
- Equipped with a 2000 W fibre laser source and a single wire feeding system, the X3 ProLaser 2000W ensures fast, stable and repeatable welding results with minimal post-weld finishing.
- Its intuitive digital interface and ergonomic handheld gun allow operators to achieve high-quality results with a short learning curve.
- The reinforced chassis, improved internal wiring and enhanced mobility make this system a reliable solution for workshops seeking productivity, versatility and consistent laser quality under demanding industrial conditions.
| Input voltage | AC230V (±10%) 50/60Hz |
| Input power | 7.8 kW |
| Central wavelength | 1080±10nm |
| Electro-optical conversion efficiency | ≥40% |
| Laser power | 2000 W |
| Fiber cable length | 12 m |
| Cooling method | Water |
| Sweep width stainless steel / carbon steel | 0~6 mm |
| Sweep width aluminum alloy | 0~6 mm |
| Penetration stainless steel / carbon steel | 0.5~4.5 mm |
| Penetration aluminum alloy | 0.5~4.5 mm |
| Weld thickness stainless steel / carbon steel | 0.5~6 mm |
| Weld thickness aluminum alloy | 0.5~6 mm |
| Welding wire diameter stainless steel / carbon steel | 0.8 & 1.0 &1.2 &1.6 mm |
| Welding wire diameter aluminum alloy | 1.2 &1.6 mm |
| Recommended cutting thickness | ≤ 5mm |
| Cleaning speed | 50 mm/s |
| Water tank capacity | 8L |
| Power supply weight | 92 KG |
| Power supply dimensions | 773*410*737 mm |
| Wire feeder weight | 11.5 kg |
| Dimensions of the wire feeder | 628*240*340 mm |
Features
Welding
Fast and stable laser welding with low heat input, delivering clean weld seams, minimal distortion and consistent penetration.
Cutting
Quick change to cutting mode allows precise cutting of thin sheet metal, with smooth edges, minimal burr formation and straight or curved cutting paths.
Cleaning
Laser cleaning mode enables efficient removal of rust, paint, grease and surface contaminants, ensuring optimal surface preparation without chemicals or abrasives.
Applications
- Laser welding of stainless steel, carbon steel and aluminium alloys;
- Sheet metal fabrication and light structural welding;
- Maintenance, repair and on-site welding operations;
- Laser cutting of thin metal sheets and profiles;
- Surface cleaning before welding, coating or assembly;
- Removal of rust, paint, grease and surface contaminants;
- General metalworking and flexible workshop applications.