Category: Videos

We present the TP AC/DC series programming guide in video format. Learn how to adjust the welding parameters either in TIG AC or TIG DC mode, in pulsed and non-pulsed and in MMA (coated electrode) mode.

Problems at the end of the weld, when using tig with lift? We present video about ARCOFF function, which when the welding voltage value set by the operator is reached, the arc extinguishes automatically to improve the end of the weld. This function is available in all DC models of MMA/TIG serie3.

TIG Dynamics, present in all serie 3 TP DC machines. It allows that, when there is a variation of the distance between the TIG welding torch and the workpiece, there is a compensation in terms of power of the machine to maintain the same thermal delivery.

TIG welding feeder that allows the addition of wire over the bath
with tig welding intermittently or continuously. Reduce costs with addition material thanks to the lack of material waste, productivity gain and quality due to a consistent and fast material addition, faithfully reproducing the movement of the welder’s hand.
Suitable for manual, automatic or
orbital TIG welding applications on thin or thick metalsheets, pipes and refill. Suitable for steel, stainless steel
aluminium alloys, titanium, from 0.8 to 1.2 mm, in 5kg,15 kg spool or large wire packs.

MecaPulse system for low heat continuous welding with less workpiece distortion and excellent gap bridging of thin plates. Great reduce of wire and energy consumption. Present in MIG/MAG DIGIT II, SYNERGIC II and LTRONIC SYNERGIC machines.